All Categories
EN

Home>News>Industry News

What are the steps in the design of the foot brake pedal assembly inspection tool: middle floor inspection tool

Time : 2021-07-28 Hits : 33

What are the steps in the design of the foot brake pedal assembly inspection tool: middle floor inspection tool

1, workpiece and inspection specific design modeling

2. Design modeling of cross-section model

3. Positioning and clamping of the workpiece

4. The design of the bottom plate assembly

5. Detection of holes

The key to the design of the throttle semi-assembly inspection tool lies in:

1. The correct clamping of parts, including positioning, clamping position, clamping sequence, etc., because in the detection of sheet metal parts and injection molded parts, whether the clamping is correct or not will cause deformation of the parts

2. The benchmark establishment system for testing, then set the reference point on the inspection tool (not on the part), and determine the coordinate system through the six-point positioning principle. These reference points are the benchmarks for the inspection of the inspection tool. Corresponding accuracy inspections are carried out periodically. Sometimes the benchmark of these inspection tools is to use three standard balls. In that manual, you can find the size series of different sizes of inspection tools and the common structures on the inspection tools.